×

Articole recomandate care v-ar putea plăcea

ADAPTOR SPACER fixare HDD/ SSD 2.5  in bay de 3.5 , 1 x 2.5 ,  SPR-25352
Promo

ADAPTOR SPACER fixare HDD/ SSD 2.5 i...

27.00 lei

UBIQUITI U-POE++-EU POE ADAPTER 60W 48V 1.25A
Promo

UBIQUITI U-POE++-EU POE ADAPTER 60W 4...

40.84 lei

MIKROTIK S-31DLC20D SFP Module 1.25Gb/s 1310nm 2x LC 20km Single mode
Promo

MIKROTIK S-31DLC20D SFP Module 1.25Gb...

108.19 lei

Ghilotina (cleaver) pentru taiere fibra optica 9 - 16mm - Emtex
Promo

Ghilotina (cleaver) pentru taiere fib...

141.22 lei

Ubiquiti UACC-AOC-SFP10-10M, Cablu optic SFP+, Lungime: 10m, Culoare: Aqua.
Promo

Ubiquiti UACC-AOC-SFP10-10M, Cablu op...

241.56 lei

Bobina de linie 6SL3000-0CE32-3AA0
Promo

Bobina de linie 6SL3000-0CE32-3AA0

2,864.65 lei

10GBASE-SR SFP+ LC TRANSCEIVER/SPEC: 850NM MULTI-MODE
Livrare rapidă

10GBASE-SR SFP+ LC TRANSCEIVER/SPEC: ...

124.25 lei

Soldering gun for tin, fludor, power 75W
- it is powered at 230V AC
- the set also contains 5 spare tips
Packaging: blister 1 pc

Destination:

The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin.

Spare parts:

Soldering loops can be purchased in stores with electrical installation materials.

Warning:

Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket.

Liquidation:

Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.
Livrare rapidă

Soldering gun for tin, fludor, power ...

127.95 lei

Soldering gun for tin, fludor, power 100W
- it is powered at 230V AC
- the set also contains 5 spare tips
Packaging: blister 1 pc

Destination:

The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin.

Spare parts:

Soldering loops can be purchased in stores with electrical installation materials.

Warning:

Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket.

Liquidation:

Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.
Livrare rapidă

Soldering gun for tin, fludor, power ...

136.71 lei

Soldering gun for tin, fludor, power 125W
- it is powered at 230V AC
- the set also contains 5 spare tips
Packaging: blister 1 pc

Destination:

The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin.

Spare parts:

Soldering loops can be purchased in stores with electrical installation materials.

Warning:

Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket.

Liquidation:

Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.
Livrare rapidă

Soldering gun for tin, fludor, power ...

140.68 lei

Soldering gun for tin, fludor, power 100W
- it is powered at 230V AC
- the set also contains 5 spare tips
Packaging: blister 1 pc

Destination:

The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin.

Spare parts:

Soldering loops can be purchased in stores with electrical installation materials.

Warning:

Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket.

Liquidation:

Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.
Livrare rapidă

Soldering gun for tin, fludor, power ...

143.56 lei

Soldering gun for tin, fludor, power 125W
- it is powered at 230V AC
- the set also contains 5 spare tips
Packaging: blister 1 pc

Destination:

The transformer soldering gun is designed for soldering small components. It is especially recommended for soldering connections in electrotechnics, where the soldered components will not be damaged by the resistance heat of the soldering loop. It is a compact device, in accordance with the regulations valid during its manufacture and approved for operation by the national verification center. The transformer with nickel terminals of the secondary is deposited in the plastic case. The soldering loop is fixed on their ends with the help of M3 screws. Operation is controlled using the microswitch button. In the case, under the terminals of the secondary, is the LED diode. The connection to the electrical voltage network is made with the help of a flexible cable of 1.8 m. The use: Before putting into operation, the handle must be adjusted in the right working position. During this action, the soldering gun must be disconnected from the electrical network. After adjusting the loop and inserting it into the socket (with the established voltage of 230 V and appropriate protection), the device is ready for use. By pressing the button of the soldering gun, it is put into operation. At the same time, the LED diode lights up as an indicator of operation and which at the same time illuminates the glued area. The sticking time - button contact is 10 seconds, the rest period until the next start is 30 seconds. This cycle must be respected in order not to overload the transformer. Before the first gluing, it is recommended to dip the hot handle in rosin. When using the tubular tin (max. &ampOslash &ampplusmn3 mm) dipping is not necessary, being filled with rosin.

Spare parts:

Soldering loops can be purchased in stores with electrical installation materials.

Warning:

Use the soldering gun only at the voltage mentioned on the label and in the instructions. Before the first start-up, check the condition of the power cable, so that it is not damaged. This check must be repeated before every other use, or in case of suspicion of damage due to incorrect handling. Use the device only where there is no risk of damage to the soldered components from the heat of the soldering iron. For all actions - replacing the handle, checking the power cable, etc. the soldering gun must be without voltage, the plug removed from the socket.

Liquidation:

Liquidate the product according to the valid regulations and orders, i.e. hand over the packaging and electrical devices to the places designated for this purpose. All repairs and interventions on the electrical components of the soldering gun can only be carried out by the specialized workshop with appropriate qualifications, or by the manufacturer. This appliance can be used by children aged 8 years and older and the elderly or with reduced physical, mental and sensory capabilities or with insufficient experience and knowledge, only if they are supervised or have been instructed in the safe use of the appliance. the consumer and understand possible dangers. It is forbidden for children to play with this consumer. Cleaning and maintenance by the user cannot be performed by children without supervision.
Livrare rapidă

Soldering gun for tin, fludor, power ...

147.52 lei


PLANET MGB-SX2 module de emisie-recepție pentru rețele Fibră optică 1000 Mbit/s SFP 1310 nm

PLANET MGB-SX2 module de emisie-recepție pentru rețele Fibră optică 1000 Mbit/s SFP 1310 nm
PLANET MGB-SX2 module de emisie-recepție pentru rețele Fibră optică 1000 Mbit/s SFP 1310 nm


Descriere


mai mult

Specificații produs


PLANET MGB-SX2 module de emisie-recepție pentru rețele Fibră optică 1000 Mbit/s SFP 1310 nm

Referintă: 271060
SKU: MGB-SX2
Compară:
Preț standard

104 06 lei
Pret fara TVA

125.91lei
Pret brut

Preț B2B

104 06 lei 20.44€
Pret fara TVA

125 91 lei 24.73€
Pret brut

Înregistrează companie

Actualizat acum 4 ore si 28 minute

În stoc  (30)



Pret NET: 104.06 RON [20.44 €]
Mai multe informații, te rog
Cere detalii
Te notificam imediat ce articolul va fi publicat!


Garanție:  24 luni
Comercializat din 05/02/2024
Ridică din Alege Easybox
Cost transport 19.00 lei
Toate prețurile includ TVA

Compară  

Poduse similare :


Actualizat acum 3 ore si 44 minute

În stoc  (10)



12086 lei 23.74€
     

Actualizat acum 4 ore si 29 minute

ultimul produs în stoc



12118 lei 23.80€
     

Actualizat acum 5 ore si 34 minute

În stoc  (44)



12131 lei 23.82€
     

Actualizat acum o ora44 minute

ultimul produs în stoc



12184 lei 23.93€
     

Actualizat acum 3 ore si 29 minute

În stoc  (67)



12292 lei 24.14€
     

Actualizat acum 3 ore si 29 minute

În stoc  (7)



12292 lei 24.14€
     

Actualizat acum 14 minute

În stoc  (17)



12295 lei 24.15€
     

Actualizat acum 4 ore si 28 minute

În stoc  (50)



12296 lei 24.15€
     

Actualizat acum 2 minute

În stoc  (5)
Disponibil imediat


PRP:12315 lei  11244 lei 22.08€
     

Actualizat acum 3 ore si 29 minute

În stoc  (20)



12430 lei 24.41€
     

Actualizat acum 3 ore si 29 minute

În stoc  (20)



12430 lei 24.41€
     

Actualizat acum 3 ore si 33 minute

În stoc  (9)



12483 lei 24.52€
     

Actualizat acum 4 ore si 52 minute

În stoc  (182)
Disponibil imediat


12494 lei 24.54€
     

Actualizat acum 3 ore si 29 minute

În stoc  (5)



12501 lei 24.55€
     

Actualizat acum 8 minute

În stoc  (14)
Disponibil imediat


PRP:12524 lei  11435 lei 22.46€
     

Actualizat acum 4 ore si 10 minute

În stoc  (16)
Disponibil imediat


PRP:12584 lei  11489 lei 22.56€
     

Actualizat acum 3 ore si 26 minute

În stoc  (137)
Disponibil imediat


12634 lei 24.81€
     

Actualizat acum 3 ore si 29 minute

În stoc  (6)



12649 lei 24.84€
     

Actualizat acum 3 ore si 33 minute

ultimele (3) produse



12678 lei 24.90€
     

Actualizat acum o ora32 minute

În stoc  (6)



12741 lei 25.02€
     

Actualizat acum 14 minute

În stoc  (37)



12748 lei 25.04€
     

Actualizat acum 4 ore si 28 minute

În stoc  (14)



12758 lei 25.06€
     

Actualizat acum 3 ore si 29 minute

În stoc  (30)



12803 lei 25.14€
     

Actualizat acum 14 minute

În stoc  (109)



12817 lei 25.17€
     

Actualizat acum 3 ore si 49 minute

ultimul produs în stoc



12849 lei 25.23€
     

Actualizat acum 3 ore si 29 minute

În stoc  (5)



12855 lei 25.25€
     

Actualizat acum 3 ore si 52 minute

În stoc  (43.000)



12955 lei 25.44€
     

Actualizat acum 8 minute

În stoc  (55)
Disponibil imediat


PRP:13011 lei  11879 lei 23.33€
     

Actualizat acum 3 ore si 29 minute

În stoc  (5)



13011 lei 25.55€
     

Actualizat acum 3 ore si 33 minute

În stoc  (22)



13033 lei 25.60€
     

Actualizat acum o ora2 minute

În stoc  (22)



13040 lei 25.61€
     

Actualizat acum 3 ore si 54 minute

În stoc  (25)



13045 lei 25.62€
     

4.6/5 63 reviews

  •    80 zile,19 ore si 36 minute

    Am achiziționat de la URY STORE un Server DELL PowerEdge T160 cu o configurație de top: procesor Intel Xeon E-2488, 2 x SSD Samsung de 1TB, placă video RTX A400 LP 4GB cu 4 x mini DisplayPort, într-un format Smallbox ideal pentru spații restrânse. Performanța este remarcabilă — serverul rulează fără probleme sarcini complexe, fiind perfect pentru medii de virtualizare, dezvoltare software și aplicații grafice. Livrarea a fost rapidă și fără incidente, iar produsul a fost ambalat cu grijă, ajungând în stare impecabilă. Ce m-a impresionat cu adevărat a fost nivelul de suport oferit de echipa URY STORE: comunicare clară, promptitudine și disponibilitate pentru orice întrebare tehnică. Este evident că URY STORE pune accent pe calitate, atât în ceea ce privește produsele, cât și serviciile. Într-un domeniu în care fiabilitatea și suportul tehnic sunt esențiale, URY STORE reușește să ofere o experiență completă și de încredere. Recomand cu toată încrederea acest magazin tuturor celor care caută echipamente IT performante și servicii profesionale. Cu siguranță voi reveni pentru viitoare achiziții!

  •    109 zile,o ora46 minute

    Foarte multumit de interactiunea cu magazinul. Dl Cristian a fost extrem de amabil si maleabil. Tot procesul de achizitie echipamente a mers snur. Recomand!

  •    193 zile,15 ore si 24 minute

    Ury store,un magazin foarte bun,orice problema intampinati,...,domnul administrator rezolvă Achizitionasem un laptop Asus Vivobook.Acumulatorul era mort.De nou.Am contactat firma prin dna Stela Janko si,imediat,au trimis Cargus curier ,au preluat laptopul si in cateva zile mi l au adus cu alt acumulator instalat in service ul dlor.Nu m a costat nimic.Apoi,deoarece acest laptop nu are nimic pe el si se instaleaza mai greu windows si office ul microsoft ,am tot scris pe wh si am sunat la dl administrator.Explcandu i situaitia mea,ca am luat acest laptop din banii de prima de cariera didactica si ca nu am laptop si nu stiu sa instalez sistem dr operare pe el,a trimis Sameday ,l au preluat si,in cateva zile,mi l au trimis inapoi cu toate instalate...si nici un ban nu mi au cerut ..au platit si curier fan courier inapoi...Deci,oamenii,dl administrator indeosebi,sunt Oameni si chiar daca s a strecurat o mica greseala de acumulator initial,au indreptat o cu varf si indesat,indatorându mă...lucru pentru care ,le MULTUMESC frumos si ii felicit.Va doresc spor si succes,Ury Store! Viata indelungata cu sanatate!

  •    194 zile,23 ore si 51 minute

    Am achiziționat un Invertor volt polska sinus pro ultra hv6000 Comunicare super, livrare super, momentan aparatul funcționează cum trebuie. Bravo !

  •    208 zile,23 ore si 48 minute

    Mi s a dat un laptop refurbished cu acumulator mort ,desi am platit la pret de nou ...mi s a preluat cu Cargus si inlocuit acumulatorul.Solicit sa schimb acest laptop cu alt model,sper nou ..1700 lei si mi se inchide brutal telefonul de catre angajatul lor de whatsapp...care nu discuta prin mesaje,doar cu apel...e GROAZNIC! NU CUMPARATI DE LA EI

  •    212 zile,52 minute

    Am achiziționat recent un laptop de gaming de la Ury Store și sunt extrem de mulțumit atât de produs, cât și de serviciile oferite. Personalul a fost foarte amabil și bine informat, răspunzând cu răbdare la toate întrebările mele și oferindu-mi recomandări utile în funcție de nevoile mele. Laptopul a fost livrat rapid, ambalat impecabil, iar produsul corespunde în totalitate descrierii de pe site. Funcționează perfect, performanțele sunt excelente și se vede că este un produs de calitate. Apreciez în mod deosebit comunicarea promptă și profesionalismul echipei. Este clar că pun accent pe satisfacția clientului. Cu siguranță voi reveni pentru viitoare achiziții și recomand acest magazin tuturor celor care caută echipamente IT de încredere!

  •    233 zile,21 ore si 18 minute

    Am avut o experiență foarte plăcută cu această firmă! Am comandat o imprimantă și am fost impresionat de promptitudinea livrării — totul a decurs rapid și fără probleme. Personalul a fost foarte amabil și profesionist, oferindu-mi toate informațiile de care aveam nevoie. Se vede că este o firmă serioasă, care pune accent pe calitatea serviciilor oferite. Recomand cu încredere!

  •    277 zile,41 minute

    Am cumparat un laptop HP, multumita de produs si de interactiunea cu cei de la URY STORE. Oameni seriosi, saritori, m-au ajutat cu tot ce am avut nevoie!

  •    277 zile,19 ore si 37 minute


  •    277 zile,21 ore si 2 minute

    Servicii profesioniste, echipamente de calitate. Recomand!

  •    277 zile,21 ore si 20 minute


  •    412 zile,14 ore si 17 minute

    Recomand cu incredere URY STORE. Servicii impecabile, comunicare foarte buna, produse livrate la timp. Mult succes cu business-ul!

  •    443 zile,55 minute


  •    464 zile,18 ore si 20 minute

    Am fost placut surprins de interactiunea cu personalul magazinului. Comanda s-a derulat normal, produsul ajuns cu bine. Marele atu este ca au produse care nu sunt aduse de alte magazine din tara noastra.

  •    466 zile,18 ore si 53 minute


  •    484 zile,19 ore si 23 minute

    Servicii de nota 10. Am achiziționat un o imprimanta multifuncțională și sunt foarte mulțumită atat de produs, cât și amabilitatea și promptitudinea personalului.

  •    485 zile,11 ore si 4 minute


  •    486 zile,14 minute


  •    501 zile,47 minute

    Cooperare excelenta!

  •    508 zile,22 ore si 28 minute

    Foarte prompți și serviabili ! Laptopul încă nu l-am primit, dar serviciile au fost ireproșabile.