PSUP-XTAR-VX4-BL
| Charger Li-Ion/Ni-MH/Ni-Cd/LiFePO4 |
| Power Input: |
| - PD2.0(12V 1.67A) Recommend |
| - QC3.0(9V 2A)/5V 2A |
| 3.6V/3.7V Li-Ion: |
| 10440/14500/14650/16340/17335/17500/17670/18350/18490/18500/18650/18700/20700/21700/22650/25500/26650/32650 |
| Constant Charging Current: 3Ax1 / 2Ax2 / 1Ax4 / 0.5Ax4 / 0.25Ax4 |
| Charging Cutoff Voltage:4.20±0.05V |
| Charging Cutoff Current: ≤150mA |
| 1.5V Li-ion AAA/AA |
| Constant Charging Current: 0.5Ax4 |
| Charging Cutoff Voltage: N/A |
| Charging Cutoff Current: ≤150mA |
| 1.2V Ni-MH AAA/AA/A/SC/C/D |
| Constant Charging Current: 0.5Ax4 |
| Charging Cutoff Voltage: 1.45±0.1V |
| Charging Cutoff Current: ≤150mA |
| 3.2V LiFePO4: |
| 10440/14500/14650/16340/17335/17500/17670/18350/18490/18500/18650 /18700/20700/21700/22650/25500/26650/32650 |
| Constant Charging Current: 3Ax1 / 2Ax2 / 1Ax4 / 0.5Ax4 / 0.25Ax4 |
| Charging Cutoff Voltage: 3.65±0.05V |
| Charging Cutoff Current: ≤150mA |
| Safety Features: |
| Intelligent detection |
| Reverse polarity protection |
| Over-Current protection |
| Over-Voltage protection |
| Over-Charge protection |
| Short-Circuit protection |
| Auto-Stop after full charge |
| Soft start |
| Product Advantage |
| • The first capacity tester for rechargeable 1.5V Li-ion batteries. |
| • Compatible with 3.6/3.7V Li-ion |
| 1.5V Li-ion |
| 1.2V Ni-MH and 3.2V LiFePO4 batteries. |
| • High precision capacity test to distinguish overrated batteries. |
| • Smart battery recognition prevents mis-charging. |
| • Intelligent optimal charging strategy matching. |
| • Manual current selection function to meet different needs. |
| • Higher recovery success rate for over-discharged batteries. |
| • LCD screen displays real-time charging status. |
| • Built-in multiple protections for charging safety. |
| Tips: |
| 1) Please use only compatible batteries to avoid damaging both the battery and the charger. |
| 2) For the best charging experience |
| it is recommended to use an adaptor with the 12V 1.67A PD protocol;If the |
| input power is insufficient |
| the charger will adjust charging current correspondingly. |
| 3) Please choose the correct charging mode based on the battery type. |
| 4) When the LCD screen displays "Err" |
| please promptly remove the battery. |
| 5) It is recommended to remove the battery after it is fully charged. |
| Packaging: box 1 pc. |
Excelent
