WATTMETER-EPM01
| The EPM01 active energy meter was designed for monitoring and measuring electrical loads;It is presented in the form of an effective solution in determining costs. |
| The measuring range of the Energy Meter extends from 5W to 3680W (maximum current of 16A);If the values fall below or exceed these limit values |
| accurate measurements can no longer be performed;Also |
| the device can be overloaded and |
| as a result |
| destroyed. |
| Characteristics: |
| Current time (24 hours) |
| week |
| electrical load and consumption cost |
| Total time |
| total energy used as well as increased energy costs. |
| Total recording time |
| total time and percentage |
| Dual energy consumption program |
| Before use: |
| The active energy meter is only suitable for operation with 230V AC sources;It can only be connected to 230V AC 50/60Hz power sources. |
| Operation of the Energy Meter is allowed only in closed spaces and in dry environments;Do not use the Energy Meter in open spaces. |
| Always read the identification labels of the connected devices to check if their specifications correspond to those of the Energy Meter. |
| Connection: |
| After connecting the Energy Meter to an outlet or a power source |
| the capacitors within the device will charge;After 15 minutes |
| the capacitors will have enough energy to turn on the LCD display;At this moment |
| the current time and energy consumption can be adjusted. |
| Note: the internal Li-ion battery used to support the LCD display needs at least 12 hours to fully charge. |
| Technical data |
| Operating voltage 230V AC/50/60Hz |
| alternative voltage; (NEEDLE) |
| Maximum connected current 3680w |
| Maximum current 16A |
| Rechargeable battery 2.6V |
| 40mAH |
| 12 H |
| 4mA |
| Power absorbed/power consumed via a connection plug/protected socket |
| Working temperature +10A°C to +40A°C |
| Energy display 0kwh -999.9 kwh |
| Maximum recording time 9999 hours |
| Working temperature +5°C to +40°C |
| Working humidity 80% below 31°C |
| from 31°C to 40°C this figure decreases linearly to 50% |
| Degree of protection IP20 |
| Pollution degree 2 |
| Notes: Do not use two Energy Meters at the same time |
Excelent
